Skip to content
SearchFree account
Menu
Article

Which OBD2 dongle should I buy?

For Car-Z you need a dongle that plugs into your car's OBD port. This is how you pick one that works with your phone, and why the version number on a cheap copy says little.

Published on 14 November 2026Updated on 18 November 20269 minute read

In short

  • Apps for Android and iPhone: expected in December. Until then, Car-Z works in your phone's browser: on Android in Chrome, on an iPhone or iPad in the free browser. Choose a with : it works on both.
  • A with only works with Car-Z on Android only, and that has not been tested yet. A Wi-Fi does not work.
  • A cheap sometimes says " v1.5". The maker of the chip never made that version. So the version number says little.
  • Also check whether the has a . If not, unplug it when your car is parked.

What the dongle does

Every car with has an , usually under the dashboard near the steering wheel. You plug a small box into it: the , also called an . The talks to the car and passes the data to your phone over Bluetooth.

Many work with : a chip with a fixed language of commands. Other makers use that language too. Car-Z sends those commands, and the translates them into your car's language. The chip was designed by Elm Electronics. The company announced that it would close in June 2022.

Choose an open : one that understands the standard commands. Some are closed. They only work with the maker's own app, and then Car-Z can't talk to them. If the product page doesn't mention , pick a different one.

The passes on what the car says. The explanation of a comes from Car-Z, not from the .

Bluetooth LE, Bluetooth Classic or Wi-Fi

There are three kinds of wireless : with (the low-energy kind of Bluetooth, also ), with (the older kind) and with Wi-Fi. For Car-Z this matters a lot, because Car-Z works in the browser.

A browser connects to Bluetooth through . only works with . It works in Chrome on Android, and in Chrome on a Windows computer or a Mac. Firefox and Safari cannot do it.

can work another way: . Chrome on Android can use it to talk to a paired Classic . Car-Z has the button " or USB " for this. You first pair the in your phone's Bluetooth settings. We have not tested this with a real yet.

A Wi-Fi does not work with Car-Z.

  • Android with Chrome: a with . A Classic can work too, but has not been tested yet.
  • iPhone or iPad: only a with , in the free browser . The iPhone app: expected in December.
  • Windows computer or Mac with Chrome: a with . An cable over USB can work too, but has not been tested yet.

On an iPhone: Bluetooth LE and Bluefy

Safari on the iPhone cannot do . That is why you open Car-Z on an iPhone or iPad in . It is a free browser from the App Store that can do .

The iPhone app: expected in December. Until then, you use .

only works with . So on an iPhone, you cannot use a with only or Wi-Fi with Car-Z.

Note: "works with iPhone" on the box does not always mean . According to its maker, the OBDLink MX+ works with iOS, but it has Bluetooth 3.0. That is . It works on an iPhone with OBDLink's own app, but not in a browser.

Cheap copies: the version number is wrong

For years, many have been sold with a copy of the inside, not the chip from Elm Electronics itself.

Such a copy often reports a version number that is not true. One example is "v1.5": Elm Electronics says it never made a version 1.5. A copy can also report the number of a newer version while it runs the old software of version 1.4.

What such a copy can do is then often only what version 1.4 could do, with the bugs it had. Later versions added commands: Elm Electronics lists 100 commands for the old version 1.3a and 144 for version 2.3. So a copy with version 1.4 software lacks commands that were added later.

So the version number on the box or in the app says little. Rather choose a from a brand that says which chip and which version is inside, and where you can get help if it does not work.

Signs of a bad dongle

You cannot tell from the box whether a is good. There are signs that it is probably a bad copy, though. They come from the makers of the Car Scanner app, who have seen many :

  • "Mini" in the product name.
  • A price below about 10 dollars.
  • A Bluetooth address (MAC) that starts with 11:22:33 or 00:00:00.

Do you leave the dongle in the car?

The gets its power straight from the battery. So a that stays plugged in can draw power while the car is parked.

That is why a good has a : when the car is off, it goes to sleep and uses almost nothing. How this works differs per . Check on the product page whether the maker mentions a , and what it says about leaving the in the car.

Does the maker not mention a , or do you not know what is inside your ? Then unplug it when you park the car. Plugging it in takes a few seconds.

Three dongles with Bluetooth LE, according to the maker

These three models have . What follows comes from the maker's own website. We get nothing if you buy one of these .

  • Vgate iCar Pro 4.0: according to Vgate, it works with iOS and Android. It goes to sleep by itself 30 minutes after the engine is turned off, and wakes up when the engine starts. On an electric car, this automatic start and sleep does not work. Watch the name: Vgate also sells an iCar Pro BT3.0 (Android only, ) and an iCar Pro Wi-Fi. Older units can have firmware from before version 4.1.02 (January 2021). According to the makers of the Car Scanner app, that firmware lacks " extended addressing", which some makes need, such as Toyota and BMW. Newer firmware is available.
  • OBDLink CX: has only (5.1), no , and according to OBDLink it works with iOS and Android. It has a in which it uses less than 2 milliamps. According to OBDLink, this means you can leave it in the car all the time.
  • Veepeak OBDCheck +: has and , and according to Veepeak it works with iOS (over ) and Android. According to Veepeak, it has an version 2.2 inside. Veepeak advises unplugging it when the car is parked for more than a week.

How to choose a dongle

  1. Check whether your car has and where the is. A petrol car from the EU from 2001, or a diesel from 2004, almost always has one.
  2. Choose a with . If it only says "Bluetooth" or "works with iPhone", look for "" or "" on the product page.
  3. Choose an open that mentions , not one that only works with the maker's own app.
  4. Check whether the maker mentions a , and what it says about leaving the in the car.
  5. Buy from a shop where you can send the back if it does not work with your car.
  6. Make sure you have Chrome on Android, or on your iPhone or iPad.
  7. Plug in the , switch on the ignition and open Car-Z. Choose "Connect via Bluetooth". The connection check is free: you see right away whether the and your car talk to each other.

What we have tested ourselves

We have tested Car-Z with the built-in simulator and with a Vgate iCar Pro 4.0 in a 2021 Land Rover Defender: connecting, reading , live values and trips. We have not tested other ourselves yet.

We do not sell a ourselves. You buy one yourself, from a shop where you can send it back.

Car-Z connects over Bluetooth Low Energy (BLE). Three examples of dongles with BLE:

  • The plug we test with

    Vgate iCar Pro BLE 4.0

    Affordable and widely used. According to Vgate, it goes to sleep on its own 30 minutes after the engine is off (not in an electric car).

    Connection
    Bluetooth Low Energy 4.0
    Works on
    Android and iPhone: apps expected in December, for now via Chrome and Bluefy
    Indicative price
    about €25–35

    No commission: ordinary links, we earn nothing from them.

  • Most reliable

    OBDLink CX

    More expensive, Bluetooth LE only. It has a sleep mode; according to OBDLink, that means you can leave it plugged in.

    Connection
    Bluetooth Low Energy 5.1
    Works on
    Android and iPhone: apps expected in December, for now via Chrome and Bluefy
    Indicative price
    about €80–100
  • Good alternative

    Veepeak OBDCheck BLE+

    Good value, with Bluetooth LE and Bluetooth Classic. Veepeak does not mention a sleep mode and advises unplugging it if the car is parked for more than a week. A good alternative if the Vgate isn't available.

    Connection
    Bluetooth Low Energy 4.0
    Works on
    Android and iPhone: apps expected in December, for now via Chrome and Bluefy
    Indicative price
    about €30–40

Search for the exact model name. Similar-looking names are often a different, older model.

Frequently asked questions

Does a dongle that costs a few euros work too?

Sometimes it does. But you don't know what is inside: the version number is often wrong. Newer commands may be missing. Try it with the free connection check in Car-Z. If the seller does not mention a , unplug the when you park.

I have an iPhone. Which dongle do I need?

A with , and the free browser . Safari cannot connect to a . A with only or Wi-Fi does not work with Car-Z on an iPhone, even if the box says "works with iPhone". The iPhone app: expected in December. Until then, you use .

I already have a dongle with Bluetooth Classic. Do I need to buy a new one?

On Android, not necessarily. Pair it in your phone's Bluetooth settings and choose " or USB " in Car-Z. We have not tested this with a real yet. On an iPhone it does not work; there you need a with .

Does Car-Z sell a dongle itself?

No. We also get nothing if you buy one of the in this article.

Sources

  1. Choosing OBDII adapter (signs of a bad adapter; Vgate iCar Pro BLE firmware 4.1.02)Car Scanner, consulted on 17 November 2026
  2. Web Bluetooth API (with browser compatibility)MDN Web Docs (Mozilla), consulted on 14 November 2026
  3. Web Serial APIMDN Web Docs (Mozilla), consulted on 14 November 2026
  4. Browser data for Web Bluetooth and Web Serial (api/Bluetooth.json, api/Serial.json)MDN browser-compat-data, consulted on 14 November 2026
  5. Communicating with Bluetooth devices over JavaScriptChrome for Developers (Google), consulted on 14 November 2026
  6. Bluefy – Web BLE BrowserApp Store (Apple), consulted on 14 November 2026
  7. OBD Interpreter ICs (ELM327 versions, Elm closing down)Elm Electronics, consulted on 14 November 2026
  8. OBD Tips: ELM327 versions ("Elm Electronics never made a v1.5"), archived version February 2022Elm Electronics (via Internet Archive), consulted on 14 November 2026
  9. ELM327 (copies and version numbers)Wikipedia, consulted on 14 November 2026
  10. On-board diagnostics (pin 16: battery voltage; EOBD from 2001 and 2004)Wikipedia, consulted on 14 November 2026
  11. Vgate iCar Pro Ble4.0Vgate, consulted on 14 November 2026
  12. OBDLink CX Adapter NotesOBDLink (OBD Solutions), consulted on 14 November 2026
  13. OBDLink CXOBDLink (OBD Solutions), consulted on 14 November 2026
  14. OBDLink MX+OBDLink (OBD Solutions), consulted on 14 November 2026
  15. OBDCheck BLE+ PlusVeepeak, consulted on 14 November 2026

Read it yourself with Car-Z

Put a plug into the OBD port and see on your device what the car itself reports. Testing whether your plug and car work and reading the fault codes is free, without an account.

All articles