Skip to content
SearchFree account
Menu
France · OBD2 compatibility

Does Car-Z work with your DS Automobiles?

What works, from which year, where the port is and what to watch out for.

From which year

With an ordinary plug. Years are model years.

FuelEurope (incl. UK)
PetrolFrom 2009
DieselFrom 2009
Hybrid or plug-in hybridFrom 2012
ElectricPartly

DS Automobiles wasn't officially sold in the US; imported cars follow the rules of the market they were built for.

Check your DS Automobiles

Choose make, year and fuel. The answer appears right away.

Where was the car sold new?

Choose a make and a year to see the answer.

General guidance based on the law and known information per make; not a guarantee for one specific car. You also need a suitable plug and browser: see the guides.

What Car-Z reads

  • Live data: speed, revs, temperatures, engine load, boost and more, as far as the car reports them.
  • Stored and pending fault codes of the engine and emission-related systems.
  • Clearing those codes, always only after you confirm.
  • The vehicle identification number (VIN), if the car reports it.
  • The 12-volt battery voltage.

What it doesn't do

  • Fault codes from modules such as ABS, airbags or body electronics: those are manufacturer-specific.
  • Coding, programming, adaptations or service resets.
  • Battery health of electric cars and hybrids.
  • Keys, immobiliser or odometer.

Where is the OBD2 port?

Look for a 16-pin, trapezoid-shaped socket. Usually:

Behind the fuse box cover, low on the dashboard on the driver's side.

In many older models the port is behind the fuse box cover under the steering wheel. In newer models it is under the dashboard on the driver's side.

In right-hand-drive cars (UK, Ireland) the port is usually on the driver's side too, but some models keep it on the left.

Port location per model (Klavkarr) ↗

Security gateway

Stellantis gateway (Peugeot/Citroën platforms)

from 2021 · Applies to: Europe (incl. UK), United States

Newer models (from about 2021) have a security gateway. Reading standard OBD works. Whether clearing codes works with an ordinary plug differs per model, and we haven't been able to confirm it.

Electric and hybrid

Electric cars don't have to support standard . Usually little comes through: the 12-volt voltage works, and live values often don't.

Hybrids have a combustion engine and therefore full standard . Engine data comes through while the engine runs; battery data is manufacturer-specific.

Protocols per period

Typical for this make; it can differ per model. A good plug supports all protocols and picks the right one itself.

  • ISO 15765 CANsince 2009 · standard OBD

Good to know

  • DS Automobiles shares most of its electronics with Citroën, so what applies there largely applies here too.
  • Battery health (SoH) and exact state of charge of electric models are manufacturer data, not standard OBD. The app doesn't show them.

Tested in practice

What we and other drivers found with a real DS Automobiles. The rules above are a guideline; this is what actually happened.

No tests with a DS Automobiles yet

We haven't tested a DS Automobiles ourselves yet and fewer than 3 drivers have shared their results. Drive a DS Automobiles? Connect once and share anonymously whether it worked.

Model and yearsStatusWhat worksDongle and protocol
All modelsfrom 2009 · Petrol · Europe (incl. UK)ExpectedBased on the rules, not tested yet
  • Live data: works
  • Read codes: works
  • Readiness: works
–
All modelsfrom 2009 · Diesel · Europe (incl. UK)ExpectedBased on the rules, not tested yet
  • Live data: works
  • Read codes: works
  • Readiness: works
–
All modelsfrom 2012 · Hybrid or plug-in hybrid · Europe (incl. UK)ExpectedBased on the rules, not tested yet
  • Live data: works
  • Read codes: works
  • Readiness: works
–

Verified: tested by us or a garage. Reported: at least 3 drivers shared the same result. Expected: follows from the rules, not tested yet.

Frequently asked questions

From which year does Car-Z work with a DS Automobiles?

With a standard OBD2 plug: petrol from 2009 in Europe, diesel from 2009 in Europe. Older cars usually lack standard OBD.

Where is the OBD2 port in a DS Automobiles?

Behind the fuse box cover, low on the dashboard on the driver's side. In many older models the port is behind the fuse box cover under the steering wheel. In newer models it is under the dashboard on the driver's side.

Can I clear fault codes on my DS Automobiles?

Reading works. On newer models (from 2021) it hasn't been confirmed whether the security gateway allows clearing with an ordinary plug. On older models it works, always only after you confirm.

Does Car-Z work with an electric DS Automobiles?

Partly. Electric cars don't have to support standard OBD, so usually only the 12-volt voltage and a few values come through. Battery health is manufacturer data and isn't shown.

Which plug do I need?

An ordinary, open OBD2 plug with Bluetooth LE that understands the standard ELM327 commands. Not a closed plug that only works with its maker's own app. The guides list which plugs we've tested and how to connect them.

Can Car-Z code or program my DS Automobiles?

No. Car-Z reads standard OBD: live data and engine fault codes. Coding, programming and service resets need manufacturer-specific tools.

Sources

  1. Directive 98/69/EC (EUR-Lex)
  2. Klavkarr – OBD port location DS

How sure we are: Medium: based on reliable sources, with some details per model still uncertain.

← All makes

Ready to read your DS Automobiles?

Put a in the port, open the app and connect.