Skip to content
SearchFree account
Menu
United Kingdom · OBD2 compatibility

Does Car-Z work with your Land Rover?

What works, from which year, where the port is and what to watch out for.

From which year

With an ordinary plug. Years are model years.

FuelEurope (incl. UK)United States
PetrolFrom 2001From 1996
DieselFrom 2004From 1997
Hybrid or plug-in hybridFrom 2018From 2018

Check your Land Rover

Choose make, year and fuel. The answer appears right away.

Where was the car sold new?

Choose a make and a year to see the answer.

General guidance based on the law and known information per make; not a guarantee for one specific car. You also need a suitable plug and browser: see the guides.

What Car-Z reads

  • Live data: speed, revs, temperatures, engine load, boost and more, as far as the car reports them.
  • Stored and pending fault codes of the engine and emission-related systems.
  • Clearing those codes, always only after you confirm.
  • The vehicle identification number (VIN), if the car reports it.
  • The 12-volt battery voltage.

What it doesn't do

  • Fault codes from modules such as ABS, airbags or body electronics: those are manufacturer-specific.
  • Coding, programming, adaptations or service resets.
  • Battery health of electric cars and hybrids.
  • Keys, immobiliser or odometer.

Where is the OBD2 port?

Look for a 16-pin, trapezoid-shaped socket. Usually:

Under the dashboard on the driver's side, often behind a small cover or flap.

In right-hand-drive cars (UK, Ireland) the port is usually on the driver's side too, but some models keep it on the left.

Port location per model (Klavkarr) ↗

Security gateway

JLR Secured Diagnostics

from 2026 · Applies to: Europe (incl. UK)

From model year 2026 (outside North America), Jaguar and Land Rover protect their diagnostics. According to owners and tool makers this mainly affects coding and programming; standard OBD reading should keep working. Clearing codes hasn't been confirmed yet.

Electric and hybrid

Hybrids have a combustion engine and therefore full standard . Engine data comes through while the engine runs; battery data is manufacturer-specific.

Protocols per period

Typical for this make; it can differ per model. A good plug supports all protocols and picks the right one itself.

  • ISO 9141-2 (K-line)1996–2006 · standard OBD
  • ISO 14230 KWP2000 (K-line)1996–2008 · standard OBD
  • ISO 15765 CANsince 2004 · standard OBD
  • DoIP (Ethernet)since 2019 · manufacturer tools only

Good to know

  • The classic Defender and Discovery II with the Td5 diesel have the 16-pin port. Whether they speak standard OBD2 depends on the version; we have not tested them yet. Try it with the free connection check.
  • Newer models (from about 2019, such as the new Defender) use Ethernet (DoIP) for the manufacturer's own diagnostics. Standard OBD still runs over CAN and works with an ordinary plug.
  • Hybrids report engine data through standard OBD. Data on the hybrid battery (charge, cell voltages, health) is manufacturer-specific, and the app doesn't read it.

Tested in practice

What we and other drivers found with a real Land Rover. The rules above are a guideline; this is what actually happened.

No tests with a Land Rover yet

We haven't tested a Land Rover ourselves yet and fewer than 3 drivers have shared their results. Drive a Land Rover? Connect once and share anonymously whether it worked.

Model and yearsStatusWhat worksDongle and protocol
All modelsfrom 2001 · Petrol · Europe (incl. UK)ExpectedBased on the rules, not tested yet
  • Live data: works
  • Read codes: works
  • Readiness: works
–
All modelsfrom 2004 · Diesel · Europe (incl. UK)ExpectedBased on the rules, not tested yet
  • Live data: works
  • Read codes: works
  • Readiness: works
–
All modelsfrom 2018 · Hybrid or plug-in hybrid · Europe (incl. UK)ExpectedBased on the rules, not tested yet
  • Live data: works
  • Read codes: works
  • Readiness: works
–

Verified: tested by us or a garage. Reported: at least 3 drivers shared the same result. Expected: follows from the rules, not tested yet.

Frequently asked questions

From which year does Car-Z work with a Land Rover?

With a standard OBD2 plug: petrol from 2001 in Europe, diesel from 2004 in Europe, petrol from 1996 in the US, diesel from 1997 in the US. Older cars usually lack standard OBD.

Where is the OBD2 port in a Land Rover?

Under the dashboard on the driver's side, often behind a small cover or flap.

Can I clear fault codes on my Land Rover?

Reading works. On newer models (from 2026) it hasn't been confirmed whether the security gateway allows clearing with an ordinary plug. On older models it works, always only after you confirm.

Does Car-Z work with an electric Land Rover?

As far as we know, Land Rover has no electric models. For hybrids, engine data comes through standard OBD.

Which plug do I need?

An ordinary, open OBD2 plug with Bluetooth LE that understands the standard ELM327 commands. Not a closed plug that only works with its maker's own app. The guides list which plugs we've tested and how to connect them.

Can Car-Z code or program my Land Rover?

No. Car-Z reads standard OBD: live data and engine fault codes. Coding, programming and service resets need manufacturer-specific tools.

Sources

  1. Directive 98/69/EC (EUR-Lex)
  2. US EPA – OBD on 1996 and newer vehicles
  3. Land Rover Forums – MY26 Secured Diagnostics
  4. Klavkarr – OBD port location Land Rover

How sure we are: Medium: based on reliable sources, with some details per model still uncertain.

← All makes

You might also like

Defender and 4x4 →

Ready to read your Land Rover?

Put a in the port, open the app and connect.