Does Car-Z work with your Lincoln?
What works, from which year, where the port is and what to watch out for.
From which year
With an ordinary plug. Years are model years.
| Fuel | United States |
|---|---|
| Petrol | From 1996 |
| Hybrid or plug-in hybrid | From 2011 |
Lincoln wasn't officially sold in Europe; imported cars follow the rules of the market they were built for.
Check your Lincoln
Choose make, year and fuel. The answer appears right away.
Choose a make and a year to see the answer.
General guidance based on the law and known information per make; not a guarantee for one specific car. You also need a suitable plug and browser: see the guides.
What Car-Z reads
- Live data: speed, revs, temperatures, engine load, boost and more, as far as the car reports them.
- Stored and pending fault codes of the engine and emission-related systems.
- Clearing those codes, always only after you confirm.
- The vehicle identification number (VIN), if the car reports it.
- The 12-volt battery voltage.
What it doesn't do
- Fault codes from modules such as ABS, airbags or body electronics: those are manufacturer-specific.
- Coding, programming, adaptations or service resets.
- Battery health of electric cars and hybrids.
- Keys, immobiliser or odometer.
Where is the OBD2 port?
Look for a 16-pin, trapezoid-shaped socket. Usually:
Under the dashboard on the driver's side, near the pedals or the steering column.
In right-hand-drive cars (UK, Ireland) the port is usually on the driver's side too, but some models keep it on the left.
Security gateway
We know of no security gateway for Lincoln that affects standard OBD. Newer cars increasingly have one; reading standard OBD stays available, because emission checks depend on it.
Electric and hybrid
Hybrids have a combustion engine and therefore full standard OBD. Engine data comes through while the engine runs; battery data is manufacturer-specific.
Protocols per period
Typical for this make; it can differ per model. A good ELM327 plug supports all OBD protocols and picks the right one itself.
- SAE J1850 PWM1996–2007 · standard OBD · United States only
- ISO 14230 KWP2000 (K-line)2001–2007 · standard OBD · Europe (incl. UK) only
- ISO 15765 CANsince 2003 · standard OBD
Good to know
- Lincoln shares most of its electronics with Ford, so what applies there largely applies here too.
- American cars up to about 2007 often use SAE J1850 (PWM at Ford, VPW at GM and Chrysler). Many cheap ELM327 clones handle this poorly, so use a good-quality plug.
- Hybrids report engine data through standard OBD. Data on the hybrid battery (charge, cell voltages, health) is manufacturer-specific, and the app doesn't read it.
Tested in practice
What we and other drivers found with a real Lincoln. The rules above are a guideline; this is what actually happened.
No tests with a Lincoln yet
We haven't tested a Lincoln ourselves yet and fewer than 3 drivers have shared their results. Drive a Lincoln? Connect once and share anonymously whether it worked.
| Model and years | Status | What works | Dongle and protocol |
|---|---|---|---|
| All modelsfrom 1996 · Petrol · United States | ExpectedBased on the rules, not tested yet |
| – |
| All modelsfrom 2011 · Hybrid or plug-in hybrid · United States | ExpectedBased on the rules, not tested yet |
| – |
Verified: tested by us or a garage. Reported: at least 3 drivers shared the same result. Expected: follows from the rules, not tested yet.
Frequently asked questions
From which year does Car-Z work with a Lincoln?
With a standard OBD2 plug: petrol from 1996 in the US. Older cars usually lack standard OBD.
Where is the OBD2 port in a Lincoln?
Under the dashboard on the driver's side, near the pedals or the steering column.
Can I clear fault codes on my Lincoln?
Yes, standard engine fault codes can be cleared, always only after you confirm. Note: clearing also resets the readiness monitors, which matters for an emissions test.
Does Car-Z work with an electric Lincoln?
As far as we know, Lincoln has no electric models. For hybrids, engine data comes through standard OBD.
Which plug do I need?
An ordinary, open OBD2 plug with Bluetooth LE that understands the standard ELM327 commands. Not a closed plug that only works with its maker's own app. The guides list which plugs we've tested and how to connect them.
Can Car-Z code or program my Lincoln?
No. Car-Z reads standard OBD: live data and engine fault codes. Coding, programming and service resets need manufacturer-specific tools.
Sources
How sure we are: Medium: based on reliable sources, with some details per model still uncertain.
Related makes
Ready to read your Lincoln?
Put a small plug in the port, open the app and connect.