Does Car-Z work with your Tesla?
What works, from which year, where the port is and what to watch out for.
From which year
With an ordinary plug. Years are model years.
| Fuel | Europe (incl. UK) | United States |
|---|---|---|
| Electric | Partly, with adapter | Partly, with adapter |
Check your Tesla
Choose make, year and fuel. The answer appears right away.
Choose a make and a year to see the answer.
General guidance based on the law and known information per make; not a guarantee for one specific car. You also need a suitable plug and browser: see the guides.
What Car-Z reads
- Live data: speed, revs, temperatures, engine load, boost and more, as far as the car reports them.
- Stored and pending fault codes of the engine and emission-related systems.
- Clearing those codes, always only after you confirm.
- The vehicle identification number (VIN), if the car reports it.
- The 12-volt battery voltage.
What it doesn't do
- Fault codes from modules such as ABS, airbags or body electronics: those are manufacturer-specific.
- Coding, programming, adaptations or service resets.
- Battery health of electric cars and hybrids.
- Keys, immobiliser or odometer.
Where is the OBD2 port?
Look for a 16-pin, trapezoid-shaped socket. Usually:
Depends on the model and year: see the note below.
Some Model 3 and Model Y cars have a standard port in the driver's footwell. The Model X (2021 to April 2024) has a standard OBD port under the touchscreen, behind a panel, next to a separate diagnostic port in the centre console; from April 2024 there is one port in the left footwell, which Tesla uses with DoIP. Older Model S and X cars only have Tesla's own diagnostic connector, which needs an adapter cable. Never plug a network (RJ45) cable into a regular OBD port: Tesla warns it can cause damage.
In right-hand-drive cars (UK, Ireland) the port is usually on the driver's side too, but some models keep it on the left.
Security gateway
We know of no security gateway for Tesla that affects standard OBD. Newer cars increasingly have one; reading standard OBD stays available, because emission checks depend on it.
Electric and hybrid
Electric cars don't have to support standard OBD. Usually little comes through: the 12-volt voltage works, fault codes and live values often don't.
Protocols per period
Typical for this make; it can differ per model. A good ELM327 plug supports all OBD protocols and picks the right one itself.
- ISO 15765 CANsince 2008 · standard OBD
Good to know
- Tesla makes (almost) only electric cars.
- Even with a working connection, Tesla shares very little through standard OBD: no fault codes and hardly any live data. Tesla-specific apps use Tesla's own messages, which this app doesn't read.
- Battery health (SoH) and exact state of charge of electric models are manufacturer data, not standard OBD. The app doesn't show them.
Tested in practice
What we and other drivers found with a real Tesla. The rules above are a guideline; this is what actually happened.
No tests with a Tesla yet
We haven't tested a Tesla ourselves yet and fewer than 3 drivers have shared their results. Drive a Tesla? Connect once and share anonymously whether it worked.
Verified: tested by us or a garage. Reported: at least 3 drivers shared the same result. Expected: follows from the rules, not tested yet.
Frequently asked questions
From which year does Car-Z work with a Tesla?
Tesla has no petrol or diesel models with standard OBD in our data. See the electric section above.
Where is the OBD2 port in a Tesla?
Depends on the model and year: see the note below. Some Model 3 and Model Y cars have a standard port in the driver's footwell. The Model X (2021 to April 2024) has a standard OBD port under the touchscreen, behind a panel, next to a separate diagnostic port in the centre console; from April 2024 there is one port in the left footwell, which Tesla uses with DoIP. Older Model S and X cars only have Tesla's own diagnostic connector, which needs an adapter cable. Never plug a network (RJ45) cable into a regular OBD port: Tesla warns it can cause damage.
Can I clear fault codes on my Tesla?
Yes, standard engine fault codes can be cleared, always only after you confirm. Note: clearing also resets the readiness monitors, which matters for an emissions test.
Does Car-Z work with an electric Tesla?
Only partly. Older Teslas have no standard OBD port; newer ones sometimes need an adapter cable. Even then, very little data comes through.
Which plug do I need?
An ordinary, open OBD2 plug with Bluetooth LE that understands the standard ELM327 commands. Not a closed plug that only works with its maker's own app. The guides list which plugs we've tested and how to connect them.
Can Car-Z code or program my Tesla?
No. Car-Z reads standard OBD: live data and engine fault codes. Coding, programming and service resets need manufacturer-specific tools.
Sources
- Tesla Model X Service Manual (2021+) – diagnostic port location
- Tesla Model 3 Service Manual – OBD connector
- Tesla bulletin CD-20-17-001 – third-party CAN interface
- OVMS – OBD-II vehicles (EV notes)
- Klavkarr – OBD port location Tesla
How sure we are: Low: limited sources. Treat this as a first indication.
Ready to read your Tesla?
Put a small plug in the port, open the app and connect.