Skip to content
SearchFree account
Menu
Powertrain · Ignition and engine timing

P0012Camshaft timing, camshaft A, bank 1: too far retarded

Important

If this comes together with a rattling engine at start-up, the timing chain may be stretched. Don't put that off: a chain that jumps can cause serious engine damage.

What does it mean?

The adjusts the camshaft with oil pressure, but the measured position stays too far retarded compared with what it asked for. Camshaft A is usually the intake camshaft. Bank 1 is the side of the engine with 1. An in-line engine only has bank 1.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Less power, rough idle
  • Higher consumption
  • Rattling at start-up on some engines

Common causes

  • Oil level too low, wrong oil or dirty oil
  • Sticking oil control valve or blocked oil screen
  • Worn camshaft adjuster
  • Stretched timing chain or worn tensioner

What you can check yourself

  • Check the oil level and when the oil was last changed
  • Listen for rattling just after a cold start

What to ask the garage

  • Is the oil pressure OK?
  • Is the timing chain stretched?
  • Does the adjuster or the control valve need replacing?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes