What does it mean?
Many engines can shift the camshaft timing while driving, for more power and lower consumption. An oil control valve, driven by the control unit, does this. The control unit sees an electrical fault in the circuit of that valve. Camshaft B is usually the exhaust camshaft. Bank 1 is the side of the engine with cylinder 1. An in-line engine only has bank 1.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Less power or rough idle
- Rattling sound at start-up on some engines
Common causes
- Defective oil control valve (solenoid)
- Loose or corroded plug
- Damaged wiring
- Oil in the plug from a leaking valve
What you can check yourself
- Check that the plug on the valve is firmly in place and dry
- Check the oil level
What to ask the garage
- Is the valve or the wiring at fault?
- Is the oil the right type and is it clean?
Checked on 14 November 2026