Skip to content
SearchFree account
Menu
Powertrain · Ignition and engine timing

P0017Crankshaft and camshaft position do not match, bank 1, camshaft B

Important

This can point to a stretched or jumped timing chain or belt. Don't drive far and have it checked soon: if the timing slips further, the engine can be seriously damaged.

What does it mean?

The crankshaft and camshaft are linked by a timing chain or belt and must always turn in step. The compares their sensors and sees that they are out of step. Bank 1 is the side of the engine with 1. An in-line engine only has bank 1. Camshaft B is usually the exhaust camshaft.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Rough running or less power
  • Hard starting
  • Rattling sound from the front of the engine

Common causes

  • Stretched timing chain or worn tensioner and guides
  • Timing belt that has jumped a tooth
  • Defective camshaft adjuster
  • Faulty crankshaft or camshaft sensor

What you can check yourself

  • Listen for rattling, especially just after a cold start
  • Check the oil level: low oil pressure makes chain tensioners work poorly

What to ask the garage

  • Was the timing checked mechanically, not just electronically?
  • Is the timing chain stretched?
  • Is it safe to keep driving until the repair?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes