Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P0048Turbo boost control valve: signal too high

What does it mean?

This valve, or electric actuator, controls how much the delivers. The sees a problem in how it is driven or how it responds. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Less power or emergency mode
  • that comes in unevenly

Common causes

  • Defective control valve or electric actuator
  • Cracked vacuum hose to the
  • Loose plug or damaged wiring
  • Sticking mechanism

What you can check yourself

  • Look for cracked or loose vacuum hoses around the
  • Check that the plug on the valve or actuator is firmly in place

What to ask the garage

  • Is it the valve, the actuator or the mechanism?
  • Does the actuator need to be calibrated after replacement?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes