Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P0104Mass air flow sensor: signal drops out now and then

What does it mean?

The sensor measures how much air the engine draws in, so the can add the right amount of fuel. The signal disappears or jumps for a moment. That usually points to a loose contact, a chafed wire or a plug with corrosion, often worse with vibration, heat or damp.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Hesitation or jerking when you accelerate
  • Rough or unstable idle
  • Higher fuel consumption or black smoke on a diesel

Common causes

  • Dirty sensor element, for example from an oiled sports air filter
  • Air leak between the sensor and the engine
  • Damaged wiring or a corroded plug
  • Worn-out sensor

What you can check yourself

  • Check that the air filter is clean and fitted correctly
  • Look for loose clamps or cracked hoses between the air filter and the engine
  • Check that the plug on the sensor is firmly in place

What to ask the garage

  • Can you compare the live value with what this engine should take in?
  • Is the sensor dirty, or is it really defective?
  • Did you check for air leaks after the sensor?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes