Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P0105Intake pressure sensor (MAP): circuit fault

What does it mean?

This sensor measures the pressure in the intake manifold. The uses it to work out how much air the engine gets and, with a , how much there is. The sees an electrical fault in this circuit. Most often that is a broken wire, a corroded or loose plug, or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Less power, sometimes an emergency mode
  • Rough running or stalling
  • Higher fuel consumption

Common causes

  • Cracked or loose vacuum hose to the sensor
  • Sensor clogged with oil or soot
  • Damaged wiring or plug
  • Defective sensor

What you can check yourself

  • Check the small hose to the sensor (if there is one) for cracks
  • Check that the plug is firmly in place
  • Look for oil or soot around the sensor

What to ask the garage

  • Does the sensor show with the engine off?
  • Is the sensor clogged, or is the wiring at fault?
  • Did you check the intake for leaks?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes