In emergency mode the engine can suddenly deliver little power. Take that into account when overtaking or joining a motorway.
What does it mean?
This sensor tells the control unit how far the throttle valve is open. On some cars the same code number is used for the accelerator pedal sensor. Because two sensors check each other, a fault often puts the engine in an emergency mode. The voltage is lower than a working part can deliver. Usually that points to a short circuit to ground, a broken supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Engine in emergency mode with little power
- Jerky or unresponsive accelerator
- Unstable idle
Common causes
- Worn sensor track (often inside the throttle body)
- Loose or corroded plug
- Damaged wiring
- Dirty or defective throttle body
What you can check yourself
- Check that the plug on the throttle body is firmly in place
- Look for damaged wires near the throttle body
What to ask the garage
- Is it the sensor, the wiring or the whole throttle body?
- Does the throttle need to be relearned after the repair?
Checked on 14 November 2026