What does it mean?
This sensor measures the pressure the turbo builds up. Without a reliable value, the control unit usually limits the turbo and engine power. Electrically the signal looks fine, but the value does not match what the control unit expects from the other sensors. The part may be worn, dirty or slow, or there is a real problem in what it measures.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Less power or emergency mode
- Sometimes black smoke on a diesel
Common causes
- Sensor clogged with oil or soot
- Loose or corroded plug
- Damaged wiring
- Defective sensor
What you can check yourself
- Check that the plug on the sensor is firmly in place
- With the engine off, the boost pressure in the app should be about the same as outside air pressure
What to ask the garage
- Is the sensor itself defective, or the wiring?
- Was the sensor cleaned or replaced, and was the code cleared afterwards?
Checked on 14 November 2026