What does it mean?
This sensor tells the control unit the position of the camshaft, so it knows which cylinder is on its power stroke. Camshaft A is usually the intake camshaft. Bank 2 is the side of the engine without cylinder 1. Only engines in V or boxer layout have it. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Longer cranking before the engine starts
- Hesitation or less power
- Sometimes stalling
Common causes
- Defective sensor
- Loose or corroded plug, sometimes with oil in it
- Damaged wiring
- Camshaft timing that has shifted (stretched timing chain or belt)
What you can check yourself
- Check whether there is oil in the sensor plug
- Check whether camshaft timing codes are stored as well
What to ask the garage
- Is the sensor or the wiring at fault?
- Is the camshaft timing still correct?
Checked on 14 November 2026