Important
Stop as soon as it is safe and switch off the engine. Do not drive on until you know the cause: the engine can be destroyed within minutes.
What does it mean?
The control unit has measured that the oil pressure is too low. Oil pressure keeps a film of oil between all moving parts. Without enough pressure, bearings and the turbo wear very quickly.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Oil pressure light on, often red
- Ticking or knocking from the engine
- Engine warning light on
Common causes
- Too little oil in the engine
- Wrong oil viscosity or very old oil
- Blocked oil pickup or filter
- Worn oil pump or bearings
- Defective oil pressure sensor (less likely, but possible)
What you can check yourself
- Check the oil level after a few minutes with the engine off and the car on level ground
- Only top up with the oil your car prescribes
- If the level is fine and the light stays on: do not start the engine again, have the car towed
What to ask the garage
- Was the oil pressure measured with a gauge?
- Is there damage to the bearings or the turbo?
- Should the car be towed rather than driven?
Checked on 14 November 2026