What does it mean?
Temperature sensors in the exhaust protect the turbo and catalytic converters from overheating and control the particulate filter regeneration. Sensor 1 is the first temperature sensor in the exhaust, usually close to the engine or just before the turbo. The voltage is lower than a working part can deliver. Usually that points to a short circuit to ground, a broken supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Particulate filter regeneration does not work properly
- Sometimes less power to protect the engine
Common causes
- Defective sensor (they suffer from the heat)
- Damaged wiring or a melted plug
- Corroded plug from road salt
What you can check yourself
- With a cold engine, compare the exhaust temperature in the app (if available) with the outside temperature
- Look for melted or chafed wires along the exhaust (only when it is cold)
What to ask the garage
- Is it the sensor or the wiring?
- Can the sensor be removed without damaging the thread in the exhaust?
Checked on 14 November 2026