Skip to content
SearchFree account
Menu
Powertrain · Electrical system and control unit

P0617Starter relay: signal too high

What does it mean?

The switches the starter motor via a relay. It sees an electrical fault in that circuit, so the engine may not crank or the starter may keep running. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • Engine sometimes does not crank
  • Clicking sound when you try to start
  • on
  • Start-stop does not work

Common causes

  • Defective starter relay or fuse
  • Corroded plug or damaged wiring
  • Weak battery
  • Defective starter motor

What you can check yourself

  • Check the in the app with the engine off
  • Check the starter relay and fuse (see the owner's manual)

What to ask the garage

  • Is it the relay, the wiring or the starter motor?
  • Is the battery strong enough?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes