Skip to content
SearchFree account
Menu
Powertrain · Gearbox and speed

P0705Gear selector position sensor (P, R, N, D): circuit fault

Important

Always check that the display shows the position you chose before you drive off. Only start the engine with your foot on the brake.

What does it mean?

This sensor tells the which position the gear selector is in. They use it to choose the gear, to switch on the reversing lights and to allow starting only in P or N. The sees an electrical fault in this circuit. Most often that is a broken wire, a corroded or loose plug, or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • Engine does not start in P, or only in N
  • Wrong or flashing gear indicator
  • Reversing lights do not work
  • Gearbox in emergency mode

Common causes

  • Badly adjusted or defective sensor
  • Loose plug or damaged wiring
  • Stretched or badly adjusted gear selector cable

What you can check yourself

  • Compare the position on the display with the position of the lever
  • Check whether the reversing lights work in R

What to ask the garage

  • Is the sensor adjusted correctly?
  • Is it the sensor, the cable or the wiring?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes