Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P222ABarometric pressure sensor: signal drops out now and then

What does it mean?

This sensor measures the , which changes with the weather and altitude. The uses it to adjust the mixture and . It is often built into the itself. The signal disappears or jumps for a moment. That usually points to a loose contact, a chafed wire or a plug with corrosion, often worse with vibration, heat or damp.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Often little difference while driving
  • Sometimes less power in the mountains

Common causes

  • Defective sensor, sometimes inside the
  • Loose plug or damaged wiring
  • A problem with the sensor supply voltage (often several codes together)

What you can check yourself

  • With the engine off, compare the value in the app with the air pressure from a weather app (about 1 bar or 100 kPa at sea level)
  • Check whether other sensor codes are stored too

What to ask the garage

  • Is the sensor separate or built into the ?
  • Are there other codes that point to a supply voltage problem?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes