Fix it yourself, and know it worked
Read the code, do the job, clear the light and check the fault stays away. With live values to confirm your repair.
Guessing costs money
Without a code reader, you replace parts on a hunch. One sensor, another, a third. And the light is still on.
After the repair, you only find out whether it worked when the light comes back. Or doesn't.
From code to confirmed repair
- Read the code and the explanation
- Repair, then clear: only when stationary, always after a confirmation
- Drive, and keep an eye on pending codes: the car tells you early if the fault returns
- Use live values to check the part you replaced
What you get
What works today comes first. "Coming soon" means: not built yet, so not a promise yet.
Codes with explanations
Stored codes with a clear explanation, and an honest note when a code is manufacturer-specific.
Careful clearing
Clear after your repair, with a confirmation, only when stationary and with a snapshot first. Never automatic.
Early warning
Pending codes show whether the fault is coming back, often before the light comes on.
Live sensor values
Coolant, intake air, voltage, load, mass air flow and more. To check what you replaced.
Repair history per car
With Basic, codes and trips are kept per car in your account: what came back, and when.
Freeze frame
The engine conditions at the moment a fault was stored.
Honest about the limits
What standard OBD2 and a web app can't do for you here.
- Standard OBD2 covers the engine and emissions. ABS, airbags, body electronics and service resets usually need manufacturer-specific tools.
- No coding or programming: Car-Z reads and clears codes but never changes settings in the car.
- Which live values you get depends on your car. Not every car shares oil temperature or boost over standard OBD2.
Frequently asked questions
Can I reset the service indicator?
No. That's manufacturer-specific and not part of standard OBD2. And Car-Z never writes to the car.
Why does the code come back after clearing?
Because the cause is still there. While you drive, the car reruns its self-tests and stores the code again once the fault is confirmed. After a repair, keep an eye on pending codes.
Can I export the data?
Yes. Every trip exports as a CSV for any spreadsheet, and you can export all your data in one go. Exporting is always free.
Does it work on a laptop?
Yes, in Chrome or Edge on a laptop with Bluetooth. Handy in the garage.
You might also like
Next job on the driveway?
Open Car-Z, read the code and start with the right part.