What does it mean?
After you switch on the ignition, the airbag light comes on briefly while the system checks itself. If it stays on or comes back while driving, the system has found a fault and may have switched off some or all airbags and belt tensioners.
Common causes are a loose connector under a seat (for example after a seat was moved or removed), a worn clock spring in the steering wheel, a seat occupancy sensor or a low battery voltage.
The car drives normally, which makes this light easy to ignore. But your protection in a crash is not guaranteed.
What can you do?
- Have the system checked by a garage as soon as possible.
- Do not touch airbag wiring or connectors yourself: an airbag can deploy by accident.
- Follow your owner's manual on child seats on the front passenger seat while the system has a fault.
What can Car-Z do with it?
Car-Z can read part of thisPartly. Airbag faults are stored in the airbag control unit, which standard OBD2 does not read on most cars. Car-Z shows B codes when your car reports them over OBD2, and for example a lost connection with the airbag unit (U0151). Usually a garage needs brand-specific equipment.
Related fault codes
These codes are stored by the car when it finds the fault behind this light, as far as the car reports them over OBD2.
- B0001Airbag firing circuit: driver front, stage 1Plan a garage visit
- B0002Airbag firing circuit: driver front, stage 2Plan a garage visit
- B0010Airbag firing circuit: passenger front, stage 1Plan a garage visit
- B0020Airbag firing circuit: left side airbagPlan a garage visit
- B0028Airbag firing circuit: right side airbagPlan a garage visit
- U0151Lost communication with the airbag control unitPlan a garage visit
This page is an indication, not safety advice. Symbols, colours and the meaning differ per make and model: always check the owner's manual of your car. When in doubt, contact a garage or roadside assistance.
Content checked on 14 November 2026.