Keep an eye on the temperature gauge and warning lights while driving. If the engine gets too hot, stop and switch it off.
What does it mean?
This sensor tells the control unit how warm the engine is. It uses that for the mixture, idle speed and cooling fan, and often for the temperature gauge too. A wrong value can make the engine run poorly or hide overheating. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Hard starting, especially when cold
- Higher consumption or black smoke
- Temperature gauge wrong or cooling fan running constantly
Common causes
- Defective sensor
- Loose or corroded plug
- Damaged wiring
- Low coolant level, so the sensor is in air
What you can check yourself
- Check the coolant level when the engine is cold (never open the cap when hot)
- With a cold engine, the coolant temperature in the app should be close to the outside temperature
What to ask the garage
- Is the sensor or the wiring at fault?
- Is the coolant level correct and has the system been bled?
Checked on 14 November 2026