Skip to content
SearchFree account
Menu
Powertrain · Cooling and oil

P0119Coolant temperature sensor: signal drops out now and then

Important

Keep an eye on the temperature gauge and warning lights while driving. If the engine gets too hot, stop and switch it off.

What does it mean?

This sensor tells the how warm the engine is. It uses that for the mixture, and cooling fan, and often for the temperature gauge too. A wrong value can make the engine run poorly or hide overheating. The signal disappears or jumps for a moment. That usually points to a loose contact, a chafed wire or a plug with corrosion, often worse with vibration, heat or damp.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Hard starting, especially when cold
  • Higher consumption or black smoke
  • Temperature gauge wrong or cooling fan running constantly

Common causes

  • Defective sensor
  • Loose or corroded plug
  • Damaged wiring
  • Low level, so the sensor is in air

What you can check yourself

  • Check the level when the engine is cold (never open the cap when hot)
  • With a cold engine, the in the app should be close to the outside temperature

What to ask the garage

  • Is the sensor or the wiring at fault?
  • Is the level correct and has the system been bled?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes