Skip to content
SearchFree account
Menu
Powertrain · Fuel and mixture

P0174Mixture too lean, bank 2

What does it mean?

The constantly corrects the mixture of air and fuel. It now has to add so much extra fuel that it reaches its limit: there is too much air or too little fuel. Bank 2 is the side of the engine without 1. Only engines in V or boxer layout have it.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Hesitation or jerking, especially when accelerating
  • Rough idle
  • Sometimes as well

Common causes

  • Air leak after the sensor, for example a cracked vacuum hose or a leaking intake gasket
  • Dirty or defective sensor
  • Fuel pressure too low (weak pump, blocked filter)
  • Leaking crankcase ventilation (PCV) valve or hose

What you can check yourself

  • Listen for hissing in the engine bay with the engine running
  • Check that the oil filler cap and dipstick are properly in place
  • Look at the in the live data: high positive values confirm a lean mixture

What to ask the garage

  • Did you do a for air leaks?
  • Was the fuel pressure measured?
  • Is the sensor reading plausible?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes