What does it mean?
The control unit constantly corrects the mixture of air and fuel. It now has to add so much extra fuel that it reaches its limit: there is too much air or too little fuel. Bank 1 is the side of the engine with cylinder 1. An in-line engine only has bank 1.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Hesitation or jerking, especially when accelerating
- Rough idle
- Sometimes misfires as well
Common causes
- Air leak after the air flow sensor, for example a cracked vacuum hose or a leaking intake gasket
- Dirty or defective air flow sensor
- Fuel pressure too low (weak pump, blocked filter)
- Leaking crankcase ventilation (PCV) valve or hose
What you can check yourself
- Listen for hissing in the engine bay with the engine running
- Check that the oil filler cap and dipstick are properly in place
- Look at the fuel trims in the live data: high positive values confirm a lean mixture
What to ask the garage
- Did you do a smoke test for air leaks?
- Was the fuel pressure measured?
- Is the air flow sensor reading plausible?
Checked on 14 November 2026