Skip to content
SearchFree account
Menu
Powertrain · Ignition and engine timing

P0326Knock sensor 1, bank 1: signal out of the expected range

What does it mean?

The knock sensor listens to the engine block for pinging: combustion that starts too early and can damage the engine. Without a working sensor, the retards the ignition to be safe, which costs power and fuel. Electrically the signal looks fine, but the value does not match what the expects from the other sensors. The part may be worn, dirty or slow, or there is a real problem in what it measures.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Somewhat less power and higher consumption
  • Sometimes a pinging or rattling sound under load

Common causes

  • Loose or corroded plug
  • Damaged wiring, often under the intake manifold
  • Defective sensor
  • Sensor not tightened to the correct torque

What you can check yourself

  • Avoid heavy loads at low until it is fixed
  • Use the fuel grade your car is meant for

What to ask the garage

  • Is the sensor or the wiring at fault?
  • How much work is it to reach the sensor on this engine?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes