What does it mean?
The knock sensor listens to the engine block for pinging: combustion that starts too early and can damage the engine. Without a working sensor, the control unit retards the ignition to be safe, which costs power and fuel. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Somewhat less power and higher consumption
- Sometimes a pinging or rattling sound under load
Common causes
- Loose or corroded plug
- Damaged wiring, often under the intake manifold
- Defective sensor
- Sensor not tightened to the correct torque
What you can check yourself
- Avoid heavy loads at low engine speeds until it is fixed
- Use the fuel grade your car is meant for
What to ask the garage
- Is the sensor or the wiring at fault?
- How much work is it to reach the sensor on this engine?
Checked on 14 November 2026