The engine can suddenly stall or fail to restart, often when warm. Avoid trips where stalling would be dangerous until it is fixed.
What does it mean?
This sensor tells the control unit the engine speed and the exact position of the crankshaft. Without that signal, it does not know when to inject and ignite. Electrically the signal looks fine, but the value does not match what the control unit expects from the other sensors. The part may be worn, dirty or slow, or there is a real problem in what it measures.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine stalls, often when warm
- Engine cranks but does not start
- Rev counter drops out
- Jerking
Common causes
- Defective sensor (often heat-sensitive)
- Loose or corroded plug
- Damaged wiring
- Dirt or metal particles on the sensor, or a damaged reluctor ring
What you can check yourself
- Note whether the problem happens mainly when the engine is warm
- Watch whether the rev counter drops out just before stalling
What to ask the garage
- Is the sensor or the wiring at fault?
- Was the reluctor ring checked for damage?
Checked on 14 November 2026