What does it mean?
This sensor measures the back-pressure in the exhaust, for example before the turbo or the particulate filter. The control unit uses it to control the turbo, EGR and regeneration. Electrically the signal looks fine, but the value does not match what the control unit expects from the other sensors. The part may be worn, dirty or slow, or there is a real problem in what it measures.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Less power or emergency mode
- Regeneration problems on a diesel
Common causes
- Blocked or melted pressure hose to the sensor
- Defective sensor
- Loose plug or damaged wiring
What you can check yourself
- Look at the small hose from the exhaust to the sensor: is it firmly in place and undamaged?
- Check that the plug on the sensor is firmly in place
What to ask the garage
- Is the hose blocked, or is the sensor defective?
- Are there other exhaust or particulate filter codes?
Checked on 14 November 2026