What does it mean?
This sensor measures the back-pressure in the exhaust, for example before the turbo or the particulate filter. The control unit uses it to control the turbo, EGR and regeneration. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Less power or emergency mode
- Regeneration problems on a diesel
Common causes
- Blocked or melted pressure hose to the sensor
- Defective sensor
- Loose plug or damaged wiring
What you can check yourself
- Look at the small hose from the exhaust to the sensor: is it firmly in place and undamaged?
- Check that the plug on the sensor is firmly in place
What to ask the garage
- Is the hose blocked, or is the sensor defective?
- Are there other exhaust or particulate filter codes?
Checked on 14 November 2026