Skip to content
SearchFree account
Menu
Powertrain · Electrical system and control unit

P0651Sensor supply voltage B: circuit open

Important

Because several sensors are affected, the engine may go into emergency mode or stall. Have it checked soon.

What does it mean?

The feeds many sensors with a stable 5-volt supply. Supply B is not right, so several sensors can give wrong values at the same time. One short-circuited sensor can pull down the whole supply. The sees no current flowing: somewhere the circuit is interrupted, for example a broken wire, a plug that is off or a burnt-out part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Several sensor codes at the same time
  • Emergency mode, stalling or no start

Common causes

  • Short circuit in one of the sensors on this supply
  • Chafed or damaged wiring
  • Water in a plug
  • Internal fault in the (rare)

What you can check yourself

  • Look at which other sensor codes are stored: they often point to the culprit
  • Note whether the problem started after work in the engine bay

What to ask the garage

  • Which sensor pulls the supply down?
  • Was each sensor on this supply unplugged one by one to find the cause?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes