Because several sensors are affected, the engine may go into emergency mode or stall. Have it checked soon.
What does it mean?
The control unit feeds many sensors with a stable 5-volt supply. Supply B is not right, so several sensors can give wrong values at the same time. One short-circuited sensor can pull down the whole supply. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Several sensor codes at the same time
- Emergency mode, stalling or no start
Common causes
- Short circuit in one of the sensors on this supply
- Chafed or damaged wiring
- Water in a plug
- Internal fault in the control unit (rare)
What you can check yourself
- Look at which other sensor codes are stored: they often point to the culprit
- Note whether the problem started after work in the engine bay
What to ask the garage
- Which sensor pulls the supply down?
- Was each sensor on this supply unplugged one by one to find the cause?
Checked on 14 November 2026