Skip to content
SearchFree account
Menu
Powertrain · Diesel, particulate filter and AdBlue

P2201NOx sensor, bank 1: signal out of the expected range

Important

Without a working NOx sensor, many cars start a countdown to a start block. Have it checked in good time.

What does it mean?

The sensor measures in the exhaust gas, so the can dose and check the . It has its own small , often on the same cable. Bank 1 is the side of the engine with 1. An in-line engine only has bank 1. Electrically the signal looks fine, but the value does not match what the expects from the other sensors. The part may be worn, dirty or slow, or there is a real problem in what it measures.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • or warning
  • Countdown on the display
  • Usually no difference in driving

Common causes

  • Defective sensor (a known wear part on many diesels)
  • Corroded plug or damaged wiring near the exhaust
  • Soot or deposits on the sensor

What you can check yourself

  • Write down any countdown on the display
  • Look for damaged wiring along the exhaust (only when it is cold)

What to ask the garage

  • Is it the sensor or the wiring?
  • Does the new sensor need to be taught in?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes