Skip to content
SearchFree account
Menu
Powertrain · Diesel, particulate filter and AdBlue

P2203NOx sensor, bank 1: signal too high

Important

Without a working NOx sensor, many cars start a countdown to a start block. Have it checked in good time.

What does it mean?

The sensor measures in the exhaust gas, so the can dose and check the . It has its own small , often on the same cable. Bank 1 is the side of the engine with 1. An in-line engine only has bank 1. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • or warning
  • Countdown on the display
  • Usually no difference in driving

Common causes

  • Defective sensor (a known wear part on many diesels)
  • Corroded plug or damaged wiring near the exhaust
  • Soot or deposits on the sensor

What you can check yourself

  • Write down any countdown on the display
  • Look for damaged wiring along the exhaust (only when it is cold)

What to ask the garage

  • Is it the sensor or the wiring?
  • Does the new sensor need to be taught in?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes