Skip to content
SearchFree account
Menu
Using the app

Drive mode and using Car-Z safely on the road

Drive mode shows only the essentials in large type. Set everything up before you leave, and never operate your phone while driving.

2 min readUpdated 14 November 2026

What drive mode does

hides everything except the main gauges and warnings, in large figures you can read at a glance. Tap "" to switch it on and "Show all" to switch back. On a computer with a keyboard you can also press R. is part of Plus.

While Car-Z is connected, the screen stays on, so you do not need to touch the phone during the trip.

Before you leave

  1. Put the phone in a sturdy holder, within view but outside the area of the airbags.
  2. Plug the phone into a charger if the trip is long: a screen that stays on uses battery.
  3. Connect to the and switch on while the car is still parked.
  4. Check that the and any cables do not get in the way of the pedals.

On the road

  • Do not operate the phone while driving. If you need to change something, stop in a safe place first.
  • In most European countries it is illegal to hold or operate a phone while driving.
  • If the connection drops, Car-Z reconnects by itself. You do not need to do anything.
  • Clearing only works when the car is stationary, with the engine off.

If a warning appears

A warning in Car-Z is a signal to pay attention, not a diagnosis. Look at your car's own instruments and warning lights. Stop when it is safe to do so if you are worried, and follow your owner's manual. Car-Z does not tell you whether it is safe to keep driving.

Was this guide helpful?

Your answer is only saved on this device.

Ready to read your car?

Plug in your dongle, switch on the ignition and open the app.

All guides