How a fault code is built up
A fault code (DTC) consists of a letter and four characters, for example P0401. The letter tells you which system it is about:
- P – powertrain: engine, gearbox, fuel and emissions.
- C – chassis: brakes, steering and suspension.
- B – body: airbags, seats, lighting and comfort.
- U – network: communication between the control units.
Generic or brand-specific
The second character tells you who defined the code. A 0 (such as P0401) is a generic code with the same meaning on every car. A 1 (such as P1247) is usually manufacturer-specific: its meaning differs per make.
Car-Z explains generic codes in plain language. For manufacturer-specific codes we show what we know and tell you to look up the exact meaning for your make.
Stored, pending and permanent
- Stored (confirmed): the car has detected the fault several times. Usually the engine warning light is on.
- Pending: the car has seen a possible fault once and is waiting to see if it comes back. The light is often still off. If the fault returns, the code becomes stored.
- Permanent: on newer cars. These codes cannot be cleared with a tool; the car removes them itself once it has confirmed during driving that the fault is gone.
Freeze frame
When a code is stored, many cars save a snapshot of the conditions at that moment: engine speed, speed, coolant temperature, engine load and so on. With Plus, Car-Z shows this freeze frame when your car provides it. Before you clear codes it is always saved in the snapshot, also without Plus. It helps you and your garage understand when the fault occurs, for example only with a cold engine.
What a code does not tell you
A code says which check failed, not which part is broken. P0420 (catalytic converter efficiency), for example, can also be caused by a faulty oxygen sensor or an exhaust leak. Use the explanation as a starting point, not as a final diagnosis.
Was this guide helpful?
Your answer is only saved on this device.