What does it mean?
Stability control (ESP or ESC, together with traction control) brakes individual wheels and reduces engine power when the car starts to slip or skid.
When the light flashes while driving, the system is intervening: the road is slippery or you are taking a bend too fast. That is not a fault, but a sign to drive more calmly.
When the light stays on, the system has switched off because of a fault. Often that is a wheel speed sensor or the steering angle sensor, or a fault elsewhere, for example in the engine, that disables the system. The ABS light may come on as well.
What can you do?
- Flashing: ease off, slow down and keep more distance.
- Steady: drive extra carefully, especially on wet or slippery roads, and have the system checked soon.
- Sometimes the light stays on after the battery was disconnected or a wheel was changed. Your owner's manual may describe a reset, for example turning the steering wheel fully left and right.
What can Car-Z do with it?
Car-Z can read part of thisPartly. The stability control unit itself is usually not readable over standard OBD2. When an engine or wheel speed fault is the cause, Car-Z shows related codes (such as C0035 or P0500) when your car reports them.
Related fault codes
These codes are stored by the car when it finds the fault behind this light, as far as the car reports them over OBD2.
This page is an indication, not safety advice. Symbols, colours and the meaning differ per make and model: always check the owner's manual of your car. When in doubt, contact a garage or roadside assistance.
Content checked on 14 November 2026.