Skip to content
SearchFree account
Menu
Warning light · Amber

Particulate filter (DPF) warning light

The of your diesel is filling up with soot and needs to clean itself (regenerate) during a longer drive.

What does it mean?

The () catches soot from the exhaust. Now and then it burns that soot off at a high temperature, which only works during longer drives at a steady speed. With many short trips the filter fills up and this light comes on.

Many owner's manuals then advise a drive of about 15 to 20 minutes at a steady speed, for example on a motorway within the speed limit. Check your own manual: the exact advice differs per car.

If the light stays on, starts flashing, or the comes on as well, the filter can no longer clean itself or a sensor is faulty. The car may then reduce power to protect itself.

What can you do?

  1. Plan a longer drive at a steady speed as your owner's manual describes, when traffic and speed limits allow it.
  2. Avoid switching off the engine during a regeneration if you can. Some cars show it, for example with a higher or a running fan.
  3. Light stays on, flashes or the car loses power: have it read out by a garage soon. A blocked filter can often still be cleaned.

What can Car-Z do with it?

Car-Z can read part of this

Partly. Car-Z reads of the and its pressure sensor (such as P2002 and P2463) and explains them. The soot load and regeneration status are brand-specific on most cars and usually not available over standard .

Related fault codes

These codes are stored by the car when it finds the fault behind this light, as far as the car reports them over OBD2.

This page is an indication, not safety advice. Symbols, colours and the meaning differ per make and model: always check the owner's manual of your car. When in doubt, contact a garage or roadside assistance.

Content checked on 14 November 2026.

Frequently asked questions

Particulate filter (DPF) warning light: can I keep driving?

Amber means that something needs attention. Read what this light means for your car in the owner's manual and have it checked soon. If the car drives differently, loses power or other warning lights come on, stop as soon as it is safe.

Can Car-Z see why this light is on?

Partly. Car-Z reads of the and its pressure sensor (such as P2002 and P2463) and explains them. The soot load and regeneration status are brand-specific on most cars and usually not available over standard .

Why does the light come on briefly when I start the car?

When you switch on the ignition, most warning lights come on for a few seconds while the car checks its systems and the lamp itself. That is normal. If a light stays on after starting or comes back while driving, there is something to look at.

Does every car use the same symbol?

Most symbols follow the international standard ISO 2575, but makes and models differ in details, colours and extra messages. The owner's manual of your car is always leading.

Other amber lights

Read what your car stores

Many warning lights come with a fault code. With a small plug and Car-Z you read it yourself, explained in plain language. Testing whether your plug works is free.

All warning lights